shear strength

Based on mechanical analysis and testing research, the paper put forward a calculation method of interlayer allowable shear stress and the design method of asphalt pavement considering shear strength.

并且，在力学分析和试验研究的基础上，提出了层间容许剪应力的计算方法和考虑抗剪强度的沥青路面结构设计方法。

Big deformability was more related with its microstructure, plasticity, and shear strength.

冷镦头剧烈变形能力与合金组织 、 塑性和剪切强度关系较大.

Ambitious attempts to improve interlaminar shear strength have been made by Mueller Prosen and by Keogh.

米勒·普罗森还有基奥都对提高层间切变强度作了大胆的尝试.

This paper aimed at acquiring the real interlaminar shear strength in tension test.

在拉伸负荷方式下，层间剪切强度的测定受弯曲力矩的影响。

I would like to ask, the shear strength of soil indicators include?

请问, 土的抗剪强度指标包括?抗剪强度如何求得?

Through experiments, the shear strength of concrete brick masonry has been researched in this paper.

本文通过试验研究和理论分析研究了混凝土空心砖墙体的隔声性能.

Shear strength of discontinuities is an important parameter for landslide engineering.

岩质边坡结构面抗剪强度是分析边坡稳定性的重要参数.

Indirect Methods: To measure the interface bond strength include the interlaminar shear strength test.

测量界面粘结强度的间接方法包括层间剪切强度试验.

Concrete behavior under the biaxial state of stress is represented by a nonlinear constitutive relationship, which incorporates tensile cracking at a limit stress, tension stiffening and shear retention effects for cracked concrete, and the strain-softening phenomenon beyond the maximum compressive strength.

混凝土的非线性本构关系，则考虑受拉开裂、开裂后的拉伸加强效应和剪切折减系数以及屈服后的应变软化现象。

The melting point and the shear strength of Bi-Pb-Sn-Cd fusible alloys were determined by DSC and tension tester.

利用差热分析仪和拉伸试验机，研究了易熔合金Bi-Pb-Sn-Cd的成分对合金熔点和剪切强度的影响。

The shear strength increases with the increasing first-order and second-order asperity heights and normal stress.

节理剪切强度随着一阶和二阶起伏度及法向应力的增大而增大；

The relationship of the strength of the SiCw/ Al composite and off-axis angle of the SiC whisker is studied with the analysis method of the simplified stress. Investigation on Off-axis Tensile Test for Determination of Shear Characterization of Composites

用简化应力的分析方法推导了SiCw Al复合材料的强度与SiC晶须偏轴角α的关系，并通过试验进行验证.偏轴拉伸测定复合材料剪切特性的研究

The shear strength of columns in dynamic tests is higher than that cyclic tests.

而由动态与拟静态实验中,可发现动态实验之剪力强度普遍较高.

Different distribution methods in root has different impact on the shear strength of composite material.

根系不同的分布方式对根土复合体的抗剪强度有不同影响.

The drilling fluid has high apparent viscosity, high shear strength and strong shear dilution performance.

该钻井液表观粘度高, 切应力较大,剪切稀释特性强.

Among them, asphalt stabilized macadam materials show great advantage in high shear strength, flexural strength and fatigue resistance.

其中，沥青稳定碎石基层材料具有较高的抗剪强度、抗弯拉强度和耐疲劳性等优点。

Influence of Axial Tension on Shear Strength of Reinforced Concrete Restrained Beam

受轴向拉力影响的钢筋砼无腹筋约束梁抗剪能力试验研究

Parameters of shear strength from triaxial compression test are widely used in project construction.

在工程建设中三轴压缩试验提供的土体抗剪强度参数得到越来越广泛的应用.

The effects of secondary torsion on shear strength of biaxial flexural reinforced concrete beams are analyzed.

探讨了次生扭矩对钢筋混凝土双向受弯梁抗剪承载力的影响.

The results of the tests show that with compaction water content increasing, the compression deformation increases, the shear strength decreases and angle of friction also decreases.

试验表明：随压实含水量增大，粘土的压缩变形增加、抗剪强度降低；

Effect of Metal Surface Treatment and Bonding Technology on Shear Strength

金属工件的表面处理及胶接工艺对胶接剪切强度的影响

Calculation of Shear Strength in Plain and Reinforced Brick Masonry Wall.

无筋和配筋砌体抗剪强度的计算.

Statistics Analysis on Friction Angle of Shear Strength for Clay

粘土抗剪强度内摩擦角统计分析

Effect of magnetic field on shear strength of adhesively bonded single lap joint

外加磁场对粘接接头剪切强度的影响

The Effect of Temperature on Compression Strength and Shear Strength of Nomex Honeycomb

温度对Nomex蜂窝压缩和剪切强度影响

Results show that degree of compaction, compaction water content and saturation state of compacted soil have influence on cohesion and angle of friction of clay, thereby on the shear strength of clay.

试验表明，压实度、压实含水量及土体饱和状态对粘聚力和内摩擦角有影响，从而使抗剪强度也受到三因素的影响。

Embedded columns can increase shear strength as well as control of displacement and failure.

配以暗框边柱能提高剪力墙的抗剪强度、位移控制和破坏控制能力.

The parameters of the shear strength along layers are important stabilityshear strength test of RCC layer.

碾压混凝土层面原位抗剪试验是提供层面抗剪参数的主要试验方法.

The basic concept suggested by the second author in 1984,1986 have been extended to apply to beams with inclined tension side and the shear strength of such beams has been analyzed in this paper.

本文将蒋大骅（19841986）提出的基本概念推广到受拉边倾斜的钢筋砼梁，对其受剪承载力进行了研究。

Meamwhile, the effect of reconsolidation index to the post cyclic shear strength increment is analyzed.

同时, 分析了循环荷载作用下再固结系数对粘土强度增长的影响.